Professional tool kit for KTM and Ducati motorcycles, 68 pcs

Whether you're on a big motorcycle trip or a small tour, this 68-piece on-board tool kit will get the job done and make it a little easier.

The sturdy double-layer wheeled bag with a weight of only 2.45 kg comes with a professional motorcycle tool set made of the best materials: the S2 bits with black phosphate rust protection. The base and wrench are coated with Cr-V satin chrome. With its compact dimensions, this motorcycle tool bag with the design of Touratech will always find a place on your motorcycle.

With MIT die system (metric, inch, torx): suitable for square, 6-point, 12-point, star, knurled and damaged nuts.

Professional basic tool kit features.

Weight: 2.45 kg
Dimensions open: Width 49 cm x Height 26.5 cm
Dimensions rolled up: Ø 9 x 26.5 cm

Contents of the professional tool kit Touratech for KTM and Ducati motorcycles, 68 pieces:

• 3-in-1 multi-tool: T-handle - ratchet with 1/4" hexagonal tip - 11 mm ratchet

• Turbo Sleeve" extension for 1/4" hexagonal ratchet

• 6 mm to 1/4" square socket adapter

• 13 mm ratchet wrench (ring/open end wrench)

• 13 mm to 3/8" socket adapter

• Hexagon socket bit set T8, T10, T15, T20, T25, T27, T30, T40, T45, T50, T55, 5 mm slot (unit: 1/4" = 6.35 mm, length: 25 mm)

• Hexagonal bit set H1.5, H2, H2.5, H3, H4, H5, H5.5, H6, H7, H8, H10, Phillips PH2 (unit: 1/4" = 6.35 mm, length: 25 mm)

• MIT socket: 6 mm (1/4, E8) with drive: 1/4" = 6.35 mm

• MIT socket: 8 mm (5/16, E10)

• MIT sleeve: 10 mm (3/8, E12)

• MIT socket: 11 mm (7/16, E14)

• MIT socket: 12 mm (15/32, -)

• MIT socket: 13 mm (1/2, -)

• MIT bushing: 14 mm (9/16, E18)

• MIT bushing: 15 mm (19/32, -)

• MIT bushing: 17 mm (11/16, -)

• Cup holders (7 x 1/4" and 2 x 3/8")

• 8 mm open-end wrench/ring wrench, MIT on ring side

• 10 mm open-end wrench/ring wrench, MIT on ring side

• 12 mm open-end wrench/ring wrench, MIT on ring side

• 14 mm open-end wrench/ring wrench, MIT on ring side

• 16 mm open-end wrench/ring wrench, MIT on ring side

• Small tire pressure gauge for tires up to 3.5 bar (kg) or 50 psi

• Pressure pliers, 169 mm long

• 10 cable ties, 100 mm long

• Spark plug connector 14 mm 3/8" 14 mm 3/8

• Spark plug connector 16 mm 3/8"

• Poplock extension 3/8" with 16 mm external hex, 125 mm long

• 3/8", 72-tooth super lightweight matte finish ratchet

• MIT socket: 22 mm (7/8, -)

• MIT socket: 32 mm (1-1/4, -)

• 3/8" socket adapter to 1/4" bits

• 3/8" to 1/2" adapter

• 17 mm open-end wrench/ring wrench, MIT on ring side
• High-quality wheeled bag in design Touratech
  nylon bag 210 den (19 x 35 cm)