Revit Cayenne 2 Jacket

The Cayenne 2 jacket is the best choice for the most demanding trail style bikers, who go out on the road to push their limits. Constructed with the toughest grilles; predominantly on the front, back and under the arms; it allows air to flow over the entire body while riding off-road in the middle of summer. Equipped with the highest level protectors: SEEFLEX with CE-level 2 certification on shoulders and elbows and the SEESOFT™ AIR back protector with CE-level 2 homologation; extra-ventilated, able to absorb impacts without compromising comfort and ventilation.

This motorcycle jacket supports SEESOFT chest protectors and also comes with the connectors needed to wear Revit's Segur neck brace and is equipped with a removable lumbar support that is easily attached to the jacket by velcro.

The Cayenne 2 is prepared for the Connector HV vest; which tops off your jacket with an easy-to-fit, high-visibility accessory. This vest adds a more than acceptable level of personal safety.

If you are looking for a jacket for on-road and off-road riding; here it is! Rugged, ventilated, with premium armor, load carrying capacity and a range of adjustment possibilities.

Revit Cayenne 2 Jacket Features

✓ Mesh lining

✓ Adjustable pocket protectors

✓ Removable lumbar girdle

The lumbar girdle provides stability and protection in the kidney area. This garment comes standard equipped with a removable lumbar girdle that can be easily attached to the jacket using a sturdy Velcro fastener.

✓ External strap for hanging the garment

✓ Long connection zipper

✓ Garment prepared to use the REV'IT Segur neck brace!

✓ Prepared for use with the Connector NEON vest

The Connector HV vest allows you to complete your jacket with a high visibility accessory that is very easy to put on. This vest provides you with a higher level of personal safety.

✓S hort connection zipper

✓So ft piping on the collar

To increase your comfort, the top and inside of the collar is lined with soft fabric.

✓ Elastic at elbows

✓ Two-point collar closure/adjustment system

✓ Fully ventilated mesh

Comfort elements

✓ Adjustable elbow protection

Compartments for adjustable elbow protectors allow you to adapt these CE-certified protectors to three different heights, for a perfect fit with your body and optimal comfort while riding.

✓ Adjustment strap at the forearm, upper arm area and double adjustment strap at the waist

✓ Flexisnap neck closure

The REV'IT! Flexisnap closure allows you to easily modify the circumference of the collar, customizing its fit for each rider. Jackets are often worn for several seasons a year, and the Flexisnap closure makes it possible to adjust the collar in a matter of seconds. In winter it allows the jacket collar to fit snugly over a balaclava or neck warmer, while in summer it can be closed more loosely to allow in the wind, which is so important for cooling.

uTA flap at the wrists

✓ V-flap with zipper at the hem

Pockets

✓S leeve pocket

✓ Two inside pockets

✓ Two concealed pockets at waist

xL cargo pocket

Protective elements

✓ Garment prepared for SEESOFT™ split chest protector with CE-level 1 certification

The pocket of this REV'IT! garment is tailored for the CE-level 1 certified SEESOFT™ split chest insert, which can be purchased separately to maximize safety.

✓ Protective footprint at the elbows

✓ CE-level 2 certified SEEFLEX™ elbow protectors

With their CE-level 2 approval in accordance with the new EN 1621-1:2012 standard, SEEFLEX™ protectors are the latest innovation from our research and development department. The new standard also controls impact levels in various temperature ranges. SEEFLEX™ protectors easily exceed the new standard without sacrificing user comfort. These protectors have unique ventilation characteristics, are highly flexible and weigh next to nothing... all of which contribute to the rider's passive safety.

✓S EEFLEX™ shoulder protectors with CE-Level 2 certification

With their CE-level 2 approval in accordance with the new EN 1621-1:2012 standard, SEEFLEX™ protections are the latest innovation from our research and development department. The new standard also controls impact levels in various temperature ranges. SEEFLEX™ protectors easily exceed the new standard without sacrificing user comfort. These protectors have unique ventilation characteristics, are highly flexible and weigh next to nothing... all of which contribute to the rider's passive safety.

sEESOFT™ AIR back protector with CE-Level 2 homologation

The SEESOFT Air is our CE-level 2 certified extra-ventilated back protector, designed to absorb variable impacts without compromising comfort, ventilation or freedom of movement.

Outer layer

✓ Parkskin

✓PWR|StretchShell

✓Schoeller®-dynatec®mesh

✓ Laminated reflective

Reflective panels ensure excellent visibility from all angles, making the rider visible from all directions. For a more sophisticated look, these reflective panels are laminated directly to the fabric. This lamination process also eliminates the need for seams, making the garments even safer.

✓ Laminated reflection on the chest

Reflective panels ensure excellent visibility from all angles, making the rider visible from all directions. For a more sophisticated aesthetic, these reflective panels are laminated directly to the fabric. This lamination process also eliminates the need for seams, making the garments even safer.