BLACK-T (-30mm) Stage3 lowering shock absorber with reservoir for Indian FTR 1200 / FTR 1200 S (2019-2021)

Stage3 shock balance reservoir allows for high-performance separator piston design. Separate rebound and compression adjustability completes the high-end fine tuning .High-performance Black-T suspension for every road condition and purpose. No matter if highway, country roads, smaller country roads or a fast and ambitious riding style. A descent with driving dynamics for your INDIAN FTR 1200 / FTR 1200 S.

To consider

✓ We recommend converting the rear shock and installing it on a truss.

✓ The shock is configured based on our experience for the INDIAN FTR 1200 / FTR 1200 S and is ready to ride.

✓ The parameters are: vehicle weight / shock absorber articulation / structural conditions / test drive.

✓ The rear and front areas of the motorcycle must be adjusted for all suspension solutions.

IMPORTANT: We strongly recommend not to push the fork rods through the fork clamp. This has a very negative effect on the handling of the motorcycle.

Notice:

To ensure the parked stability of your motorcycle after it has been lowered, we recommend that you use a shorter stand and/or the center stand.

Technical information:

✓ Black-T -30 mm shock absorber in gas/oil - emulsion construction

✓ Spring preload can be adjusted with a tool.

✓ 50 clicks of adjustable rebound damping

✓ Black tip, infinitely progressive

✓ 16 mm piston rod

✓ 46 mm piston diameter

The basic configuration installed here is designed for riders up to 100 kg plus motorcycle clothing. Adjustments are possible for much higher payloads or other unusual requirements. We will then individually adapt the shock absorber to your requirements.

Scope of delivery:

✓ Black-T Stage2 shock absorber ready to install -30mm.

✓ Adjustment tool

✓ ABE documents (online)

✓ Installation instructions