Kriega Overlander-S Base for OS DIRT BIKE bags

With the Kriega OS-BASE DIRTBIKE mount no heavy metal brackets are required, this system provides a super strong and lightweight carrying solution for an enduro bike with only slight alterations to the body of the bike.

Fixed-length straps make it easy to mount and the main body shape is specifically designed to provide a tight, secure fit with plenty of clearance from the exhaust. It takes less than a minute to mount the system on the bike and only seconds to remove it.

The modular luggage design allows you to modify the luggage configuration to suit every ride, from a single day trip to longer day-long adventure rides.

Quick and easy to attach

1 - Thread the straps through the pre-fitted loops on the rear luggage rack (Bag loops included in the mounting kit).

2 - Link the upper straps around the luggage rack (Alloy spacers included in the mounting kit).

3 - Tighten the upper straps and the base, being firmly mounted to the seat.

Mounting kit includes:

- 2 OS-DIRTBIKE RINGS: Attach to the frame of the bike, near the footrests. Designed to be left on the bike when not using OS-BASE, they provide a mounting solution for
easy access to the front straps

- 4 x OS-RACK LOOPS: Provide 4 attachment points for a stand-alone OS-PACK or US-Drypack or use in conjunction with the additional loops on OS-BASE that provide multiple mounting points for a 3-bag configuration. The 2 rear OS-RACK LOOPS provide a strong and secure mounting location for the rear straps.

- 1 SILICONE THERMAL PROTECTOR: Provides a secure barrier against exhaust. Simply mounts to the muffler using the two included flanges

Kriega OS Base: Features

✓1 2 to 54 liter load capacity with center pack mounting option.

✓ Heavy-duty Hypalon construction.

✓ Quick and easy to put on / take off.

✓ Reinforced seams at all stress points.

✓ Aircraft grade alloy hooks.

✓ Non-slip cam buckles.

✓ 10 year warranty

Note: exempt from liability for damage to motorcycle bodywork.
Although most OS-BASE mounts to the seat surface, the sides may rub against the plastic side panels of the motorcycle, resulting in minor abrasion. This can be further exaggerated if mud and dust seep between the OS-BASE and the plastics. We strongly recommend that you apply a clear adhesive protective sheet where rubbing may occur on your motorcycle.